Excerpts from the LCGO-11F User Manual
[...]
Thank you for purchasing the Lehman & Clover Growth Oxygenator, variant 11F. Please assemble as per instructions in this manual. Lehman & Clover is not liable for damages caused by improper assembly during, or after the construction process.
2 year warranty included. After either voiding the warranty, please contact the customer support number on the back of the manual. Recertification fees subject to change.
[...]
Assembly
[...]
Step 1d:
Make sure you have received all parts upon delivery:
20 screws, Lehman & Clover 15.3mm x 2mm, Pentagonal + Extra
18 screws, Lehman & Clover 8.9mm x 2mm, Pentagonal + Extra
8 screws, Lehman & Clover 35.4mm x 6mm, Octagonal + Extra
6 nuts, Lehman & Clover 6.8mm (No Extra)
14 clamps, Lehman & Clover Double Safety
20 nails, Lehman & Clover 12.1mm + Extra
Boards numbered 1 - 14
Mount components numbered 15 - 21
Stainless steel container, Lehman & Clover N16F0-4, preassembled (do not open)
If any parts are missing, call the customer support number on the back of the manual
Step 1e:
Secure Lehman & Clover N16F0-4 separately from build. Do not connect cables. Do not expose to temperatures above 25 degrees celsius. Orient with the arrow upwards.
[...]
Step 2a:
Attach Lehman & Clover Double Safety (4) to part 17 beneath handles. Secure with Lehman & Clover 8.9mm x 2mm, Pentagonal (8).
[...]
Step 2f:
Secure part 20 to floor with Lehman & Clover 35.4mm x 6mm, Octagonal (8). If fixed, Lehman & Clover N16F0-4 can be attached to part 17. Do not attempt if Lehman & Clover N16F0-4 is moving. Complete step before beginning Step 5aa.
[...]
Step 3b:
Attach part 3 to part 4 using Lehman & Clover 6.8mm (2) and Lehman & Clover 15.3mm x 2mm, Pentagonal (2). Cover part 4 with part 5 and part 6 with Lehman & Clover 12.1mm (up to 10).
Step 3c:
Turn the LCGO-11F-A upside down.
[...]
Step 5aa:
If not already done, raise Lehman & Clover N16F0-4 to a minimum height of 2.4m from floor level using the assisted crank assembled from part 18 and part 21.
Step 5aaa:
If not already done, set room temperature to within the range of 28 - 35 degrees Celsius. If part 20 begins detaching from floor, cool room temperature below 22 degrees Celsius.
Step 5aaaa:
Watch your head.
[...]
Step 5c:
Fix part 10 to part 12 using Lehman & Clover 12.1mm (4). Make sure there is at least a 15cm gap between part 12 and Lehman & Clover N16F0-4.
[...]
Step 8:
Make sure you have removed part 8. If you can't find part 8, evacuate the premises and contact the urgent support number on the back of the manual.
Step 9:
Enjoy.
[...]
Safety Instruction